Installation steps for ultra-thin advertising light boxes? do you know?

Ultra-thin light box is a widely used advertising light box. It has beautiful appearance, ultra-thin and ultra-light, light box use and long life. It is often used in elevators, public passages, shopping malls, supermarkets, airports, subways, stations and other places. 

There are many types of advertising light boxes, in fact, their installation methods are similar. Today, we will discuss the installation method of ultra-thin light boxes and see what the installation steps of ultra-thin advertising light boxes are.

The first step is to determine the installation position of the light box

Since the installation position of the light box determines the later effect of the light box, the choice of the position of the light box is very important. This requires the installer to determine the installation position according to the customer's requirements and the actual situation on site to ensure that the ultra-thin light box is installed in the accurate position.

The second step is to determine the fixed point for installing the light box

Generally speaking, there are mounting holes on the back of the light box. We can determine the fixed point for installing the light box according to its position or the size of the site.

The third step is to fix the light box

Fixing methods can be divided into four types according to the actual situation:

1. If the wall to be installed is aluminum-plastic board, wood board, iron board, etc., it can be fixed directly with screws;

2. If the wall to be installed is a cement or brick wall, it can be drilled with an impact drill first, and then fixed with expansion screws;

3. If the wall is made of tiles, marble, glass, etc., you can first drill through the surface with a glass drill bit, then drill the expansion screw holes, and then fix the ultra-thin light box or use glue;

4. If it is a hoisting or hanging light box, after selecting the installation location, it is necessary to determine the fixing point of the light box according to the actual size of the installation hole of the light box, and then install the hanger and connect the ground wire.

The fourth step, ultra-thin light box wiring.

When wiring the light box, generally choose the standard for getting electricity nearby. A power socket can be installed near the outlet of the power cord behind the light box, so as to facilitate the control of the power supply of the light box in the future. Of course, there is another way to directly remove the plug of the power cord and use the direct wiring method, but when you need to pay attention, when using this method, you must wrap the connector tightly with insulating tape. .

The fifth step is to fix the light box from the inside.

Open the top cover of the light box and install it in alignment with the fixed point, that is, use an electric drill to drill holes at the position of the power cord at the base of the light box, re-install the power cord, and adjust it to a horizontal state with a spirit level.

The sixth step, turn on the power.

Test whether the various properties of the ultra-thin light box are normal, and finally cover the upper cover of the light box and clean the surface of the light box.

The installation of the ultra-thin light box determines the quality of the light box and the quality of advertising in the future, so we must install the ultra-thin light box in the correct way in accordance with the specifications. This can not only bring better advertising effects, but also appropriately extend the service life of the advertising light box.

Kingwe-Star is a professional led light box manufacturer in China, specialising in high-quality ultra-thin light box and advertising light boxes wholesale for years, welcome to contact us!